Metal Halide to LED Conversion Guide: Wattage Chart, ROI & Retrofit Options
By Lighting Engineering Team, MVS Lighting — outdoor lighting manufacturer with 5 production lines and 15+ years of outdoor lighting experience, serving global industrial and infrastructure projects. Last updated: 2026-11
Home > LED Flood Lights > Metal Halide to LED Conversion Guide
If you are evaluating whether to convert existing metal halide (MH) floodlights to LED, the answer is clear for most parking lots, warehouses, industrial parks and high-mast projects: LED wins on energy, maintenance, lifespan and long-term operating cost. The real question is no longer whether to switch, but how to convert and how fast it pays back.
The most common mistake in any conversion is replacing watt-for-watt, which usually leads to under-lighting or over-spending. The right approach is to size by lumens and target lux, not wattage. This guide gives you a metal halide to LED conversion chart, a transparent ROI model, and the three retrofit paths (including conversion kits), so procurement and engineering teams can move quickly.
For the full selection logic across all project scenarios, see the Complete LED Flood Light Guide.
Table of Contents
- Why Commercial Projects Are Converting Metal Halide to LED
- Metal Halide vs LED: The Core Technical Differences
- Key Performance Comparison
- Conversion Principle: Match by Lumens & Lux, Not Watts
- Metal Halide to LED Conversion Chart
- Lumen Depreciation & Lifespan
- Color Quality (CRI)
- Instant-On & Hot Restrike
- Energy & ROI: A Transparent Payback Model
- DLC Listing & Utility Rebates
- Three Conversion Methods
- Common Customer Concerns During Retrofit
- Common Mistakes When Converting
- FAQ
Why Commercial Projects Are Converting Metal Halide to LED
Four forces are driving large-scale MH-to-LED conversions:
- Energy regulations and electricity costs. Many regions are phasing out inefficient HID sources, and with rising commercial power rates, long-running sites carry a heavy energy burden.
- High maintenance. Metal halide relies on lamp + ballast + ignitor; when any part ages, the fixture goes down. High-mast and large-area sites also face lift-equipment and labor costs.
- Operational pain points. Parking lots running all night, warehouse yards operating 24/7, ports and industrial parks with high-mast lighting — these are where MH operating costs are magnified.
- LED is now the standard replacement. As LED efficacy has matured, both new builds and retrofits default to LED floodlights.
It is usually worth evaluating a conversion if any of the following apply:
- Electricity costs keep rising and lighting is a meaningful share of the load
- Maintenance visits (lamp/ballast replacement) are becoming more frequent
- On-site brightness has visibly declined compared to when the fixtures were new
- The site is planned for continued long-term operation, not near end-of-life demolition
- You need to add smart control, scheduling or dimming, which metal halide can’t support well
If two or more apply, the payback model later in this guide will usually justify moving ahead.
Metal Halide vs LED: The Core Technical Differences
This section explains why a lower-wattage LED can deliver more usable light — the foundation of the conversion logic.
- Efficacy (lm/W). LED floodlights deliver roughly 120–160 lm/W (premium products higher), while metal halide sits around 35–80 lm/W — and that is the bare lamp figure; after reflector and housing losses, system efficacy is lower still.
- Energy structure. Metal halide converts a large share of input power into heat rather than light, so it needs higher wattage to hit the same illuminance. LED converts more of its power into light, with less heat.
- Ballast loss. Metal halide needs a ballast to strike and regulate the lamp, which consumes roughly 10–15% additional system wattage — a “400W” fixture may draw about 450–460W from the grid. LED is direct-drive with no ballast.
- Light distribution (key). Metal halide is 360° omnidirectional and depends on reflectors to push light toward the target, a process that typically loses 30–40% of the output. LED is directional, sending light straight to the area that needs it, so usable lux on the ground is equal or higher even at lower lumens.
- Mercury and disposal. Metal halide contains mercury and requires special end-of-life handling; LED is mercury-free, easing compliance and disposal costs.
Bottom line: don’t compare lamp wattage — compare lm/W × light utilization → delivered lux.
Metal Halide vs LED Floodlight: Key Performance Comparison
| Metric | Metal Halide (MH) | LED Floodlight |
|---|---|---|
| Efficacy (lm/W) | 35–80 (lower at system level) | 120–160+ |
| Color Rendering (CRI) | 65–70 | 70–95+ |
| Color Stability | Shifts over time | Stable over life |
| Typical Lifespan | 6,000–20,000 hours | 50,000+ hours |
| Lumen Maintenance | ~20% loss in first 6 months; up to ~50% by mid-rated-life | L70 @ 50,000–100,000 h |
| Ballast Loss | Additional 10–15% of system wattage | None — direct-drive |
| Start-up Time | Several minutes warm-up | Instant on |
| Hot Restrike | 10–15 min cool-down after power interruption | Milliseconds |
| Beam / Distribution | 360° + reflector loss | Directional, high utilization |
| Maintenance Cycle | Frequent (lamp/ballast/ignitor) | Long, near maintenance-free |
| Smart Control | Limited | Supported (dimming, timer, sensor) |
| Mercury | Contains mercury | Mercury-free |
| Rebate Eligibility | Not eligible | DLC-listed models: utility rebate eligible |
Conversion Principle: Match by Lumens & Lux, Not Watts
The one correct rule for conversion sizing:
- ❌ Don’t replace watt-for-watt — the most common cause of under-lighting.
- ✅ Do design by target lumens and target lux, taking advantage of LED’s directional output (the same lux usually needs fewer watts).
Practical path: determine the site’s target lux (per the relevant application standard) → back-calculate the required lumens → then select the LED wattage. The chart below gives common starting points, but final wattage must be confirmed by a lux-based layout.
This article covers conversion sizing specifically. For application-based wattage selection on new-build projects, see the LED Flood Light Wattage Guide. To set the target lux and calculate required lumens, use the Floodlight Lux Guide; for parking layouts, see the Parking Lot Lighting Design Guide.
Metal Halide to LED Conversion Chart (by Lumens)
Common starting points — confirm final wattage with a lux-based layout for your site. Lumen figures are approximate in-service (delivered) output after lamp depreciation and reflector losses, not new-lamp ratings.
| Metal Halide (MH) | Approx. Delivered Lumens | Recommended LED | Typical Application | Product Page |
|---|---|---|---|---|
| 175W MH | ~9,000–13,000 lm | 65–100W | Pathways / small perimeter / signage | 65W · 100W |
| 250W MH | ~13,000–18,000 lm | 100–150W | Small parking lots / walkways | 100W · 150W |
| 400W MH | ~20,000–28,000 lm | 150–200W | Parking lots / warehouse yards | 150W · 200W |
| 600W MH | ~30,000–40,000 lm | 200–300W | Large yards / loading areas | 200W · 300W |
| 750W MH | ~40,000–50,000 lm | 300–400W | Industrial parks / large areas | 300W · 400W |
| 1000W MH | ~55,000–75,000 lm | 400–500W | High-mast / ports / heavy-duty | 400W · 500W |
| 1500W MH | ~80,000–110,000 lm | 750–1000W | Extra-high masts / large sports areas | 750W · 1000W |
Not sure of your target lux? Back-calculate the required lumens first with the Floodlight Lux Guide, then size the quantity with How Many Flood Lights Do I Need. For stadium and sports-field retrofits, see the Stadium LED Flood Lights Guide.
Lumen Depreciation & Lifespan: L70 vs MH’s Steep Drop
Many sites hit the same problem a few years into metal halide: the lamps still work, but the area is visibly darker.
Metal halide can lose roughly 20% of its lumens in the first 6 months and up to ~50% by mid-rated-life; rated life is typically 6,000–20,000 hours. Even when the lamp isn’t dead, the light level may already be out of spec.
LED is measured by L70 (hours to maintain 70% of initial output), reaching 50,000–100,000 hours on quality products, with stable output over time. For parking lots, logistics centers and industrial parks that need consistent illuminance, “no fade” is itself a safety and compliance value — not just saved lamps. For what separates fixtures that actually reach that life, see Why Some LED Floodlights Last 10 Years.
Color Quality (CRI) for Parking, Security & Sports
Color rendering and stability directly affect security-camera recognition, license-plate reading and overall visibility:
- CRI: quality LED floodlights reach 70–95+, vs 65–70 for metal halide.
- Color shift: metal halide drifts in color temperature over its life; LED stays stable.
- Where it matters: parking and perimeter security need stable, true white light for camera systems; sports and field lighting demand higher uniformity and rendering — see the Stadium LED Flood Lights Guide and the Color Temperature Guide.
Instant-On & Hot Restrike: A Real Operational Advantage
Metal halide needs several minutes to warm up to full output — and after a power blip it requires a 10–15 minute cool-down before it can restrike. For continuous-operation warehouses, ports and security-critical sites, that “dark window” is a real risk.
LED turns on and off instantly, restrikes in milliseconds after an outage, and supports frequent switching plus sensor/dimming integration.
Energy & ROI: A Transparent Payback Model
The question procurement really asks isn’t “is LED expensive?” — it’s “how fast does it pay back?” Here is a reusable model (figures are illustrative assumptions — replace them with your project’s real parameters).
Annual energy & cost formulas
- Annual kWh = system kW × quantity × hours/day × days/year
- Annual cost = annual kWh × rate per kWh
Example (assumption): 100 × 400W MH → 100 × 180W LED. Assumes MH draws ~460W including ballast loss; 12 h/day; 365 days; $0.12/kWh.
| Item | Metal Halide | LED |
|---|---|---|
| System power per fixture | ~0.46 kW | 0.18 kW |
| Annual energy | ~201,480 kWh | ~78,840 kWh |
| Annual energy cost | ~$24,178 | ~$9,461 |
| Annual saving (energy only) | — | ~$14,717 (≈61%) |
Maintenance savings come on top (no periodic lamp/ballast replacement, less lift work).
Payback (example): assume total project cost ~$30,000 including installation → about 2 years on energy savings alone. With DLC-qualified utility rebates (assume $150/fixture × 100 = $15,000), net cost drops to ~$15,000 → payback shortens to about 1 year.
These figures are a worked example, not a project result. Actual payback depends on your local electricity rate, operating hours, original fixture wattage and any rebate program. Send us your current fixture details for a project-specific estimate. To compare price ranges, see the LED Flood Light Cost & Price Guide.
DLC Listing & Utility Rebates: How Incentives Shorten Payback
This directly affects ROI, especially for North American projects:
- DLC (DesignLights Consortium) has Standard and Premium tiers, and only DLC-listed LED fixtures qualify for DLC-based utility rebates.
- Many North American utilities offer commercial LED retrofit rebates, often on a per-fixture basis; amounts vary widely by utility and program, and some require pre-approval.
- Rebates offset project cost directly and can shorten payback from roughly 2–3 years to about 1–1.5 years (see the ROI example above).
- Always confirm that a product is DLC-listed and eligible under the target project’s local utility program before specifying.
Official references: DesignLights Consortium Qualified Products List · U.S. Department of Energy.
Three Conversion Methods (incl. Retrofit / Conversion Kit)
Choose your path based on the condition of the existing fixtures and budget.
1. Lamp / Conversion Kit Retrofit — Keep the existing housing and pole; replace only the light source with an LED module or conversion kit. Low cost and fast install; suitable where the housing is in good shape and the ballast can be bypassed or removed. Confirm heat dissipation and ingress protection are adequate for outdoor use.
2. Fixture Replacement — Swap in a complete LED floodlight while keeping the existing pole and wiring. The most common and most reliable path for outdoor conversions: best optics, thermal management and IP rating, and it preserves full fixture warranty and DLC eligibility.
3. Full System Upgrade — Used when fixtures are aged, wiring/poles are non-compliant, or smart control is being added; may involve rewiring and control deployment. Adding dimming or smart control during conversion is a common way to amplify savings (scheduling, sensors and zoned dimming reduce energy further).
Most outdoor projects choose fixture replacement — size directly from the chart above. For projects adding dimming during conversion, see DALI vs 0-10V Dimming for LED Flood Lights.
Common Customer Concerns During Retrofit
Customers replacing metal halide floodlights with LED usually raise three practical concerns.
1. What LED wattage is required?
The first question is whether the new LED floodlight can achieve the same or better lighting result than the original fixture. Replacement should not be based on wattage alone: original wattage, lumen depreciation, mounting height, beam angle, target lux and site dimensions must all be considered. A lower-wattage LED may outperform an older MH fixture, but the final selection should be confirmed through photometric data and lighting simulation.
The goal is not simply to make the site “much brighter.” A successful retrofit provides sufficient illuminance, better uniformity and lower energy consumption without excessive glare.
2. Will installation be complicated?
Traditional MH floodlights often use a large box-shaped housing containing a replaceable lamp, ballast and other electrical components. Customers may worry that replacing the complete fixture will require major changes to the wiring and mounting structure.
In many retrofit projects, the existing pole and lighting position can be retained. The old MH fixture and ballast are removed, and the new LED floodlight is connected directly to the appropriate AC supply. LED floodlights with adjustable brackets can be fixed to the existing structure or a suitable adaptor, then aimed to the required angle.
Before installation, the contractor should still confirm:
- Input voltage and wiring method
- Existing cable condition
- Mounting-hole dimensions
- Bracket and adaptor compatibility
- Earthing and surge protection
- Weight and wind-load suitability
- Local electrical and installation requirements
The electrical work should be completed by a qualified installer.
3. Will lux and uniformity be adequate?
Customers want to know whether the whole site will have adequate illuminance and acceptable uniformity, not just whether each fixture is bright.
Example retrofit configuration (preliminary design, not a measured result): for a project with eight existing lighting positions, our preliminary configuration used 400W LED floodlights at about 7 metres — see the Mounting Height Guide for how height is determined. Each arm extended about 1 metre from the supporting structure. The fixtures used an adjustable bracket and could be aimed at an inclined angle. Asymmetric optics were considered to direct more light to the target area and reduce wasted light behind the fixture — see the Beam Angle Guide.
| Project Item | Configuration |
|---|---|
| Existing lighting positions | 8 |
| Proposed LED power | 400W per position |
| Installation height | Approximately 7 metres |
| Arm extension | Approximately 1 metre |
| Mounting method | Adjustable bracket |
| Optical option | Asymmetric distribution |
| Final confirmation | Lighting simulation and on-site aiming |
This configuration is not a universal solution. Final wattage, beam angle and aiming direction must be confirmed against site dimensions, required lux and uniformity target.
From our engineering team: the most important part of a metal halide retrofit is not finding an LED fixture of roughly equivalent wattage. It is confirming that the new fixture fits the existing mounting position, connects safely to the electrical system, and delivers the required lux and uniformity. If these three points are checked before production, the actual replacement is usually much simpler than customers expect.
For fixture options by site type, see the Parking Lot Lighting Design Guide, the Industrial Yard Flood Lights Guide and the Complete LED Flood Light Guide.
Common Mistakes When Converting Metal Halide to LED
- Replacing watt-for-watt — ignores LED’s directional advantage; causes under-lighting or over-spending.
- Ignoring optics/distribution — looking only at lumens, not beam angle and uniformity; ground lux falls short.
- Ignoring DLC eligibility — specifying a product not on the QPL forfeits rebates and lengthens payback.
- Ignoring IP rating and surge protection — inadequate protection outdoors raises failure rates. See IP Rating for Outdoor LED Flood Lights.
- Comparing fixture price alone, without operating cost — a cheaper unit that fails early or draws more power can cost more over 5–10 years. See Project-Grade vs Cheap LED Flood Lights: The Real 10-Year Cost Comparison.
Avoiding these five is the prerequisite for a strong ROI.
FAQ
What wattage LED replaces a 400W metal halide floodlight? A 150–200W LED floodlight (about 20,000–28,000 delivered lumens) typically replaces a 400W MH. Because LED light is directional and more efficient, you usually need fewer watts to reach the same ground-level lux. Always confirm with a lux-based layout rather than matching watt-for-watt.
Is LED brighter than metal halide? On raw lamp lumens an LED isn’t always higher, but thanks to directional optics and higher light utilization, an LED floodlight usually delivers equal or higher usable lux on the target area — and it avoids the rapid lumen depreciation of metal halide, so it stays bright far longer.
Do I need to rewire to convert metal halide to LED? In most cases, no. A full-fixture replacement or a conversion kit keeps the existing poles and wiring. Rewiring is only needed when wiring is aged, the pole is non-compliant, or you are adding smart control or dimming.
Do I need to replace the ballast when switching to LED? Direct-wire LED replacements bypass the ballast entirely, eliminating its energy loss and future failure risk. Conversion kits also typically remove or bypass the ballast — confirm this with your supplier before installation.
How fast do LED floodlights pay back after a metal halide conversion? Long-running commercial projects typically see roughly 1.5–3 years from energy and maintenance savings alone; where DLC-listed fixtures qualify for utility rebates, payback can shorten to roughly 1–1.5 years. Your own figure depends on electricity rate, operating hours and original wattage.
Can I replace just the lamp with a conversion kit? Yes. A conversion kit lets you keep the original housing and pole. First confirm heat dissipation, IP rating and ballast bypass suit outdoor use; otherwise a full-fixture replacement is the safer option.
Are there rebates for converting metal halide to LED? In North America and some other regions, DLC-listed LED fixtures can qualify for utility rebates. Eligibility and amounts depend on the local utility’s program.
Conclusion
For most commercial and industrial outdoor projects, converting metal halide to LED floodlights is now the standard choice: lower energy, less maintenance, longer life, more stable illuminance — and faster payback where rebates apply. The keys to a successful conversion are sizing by lumens and lux rather than wattage, and checking DLC requirements before specifying.
Need a conversion plan or wattage sizing? Send us your existing metal halide wattage, mounting height, target lux and whether DLC is required, and we’ll match the LED wattage, beam angle, IP rating and control option to your site.
- Browse the full range → LED Flood Light Series
- Select by wattage → LED Flood Light Wattage Guide
- Calculate your lux first → Floodlight Lux Guide
- Download the spec template → LED Flood Light Specification Template