Street Light Pole Spacing & Quantity Calculator | MVS Lighting

Street Light Pole Spacing & Quantity Calculator

Use this calculator to estimate pole spacing, pole quantity and fixture quantity from the road length, mounting height and layout type. The result is suitable for preliminary budgeting only.

Final pole spacing and lighting performance must be verified with the actual luminaire IES file, road conditions and applicable lighting standards. This tool does not calculate lux, luminance or uniformity.
Step 1

Estimate Pole Spacing

If you already have a DIALux layout, enter the confirmed spacing here and it will be used in Step 2 instead of the S/H estimate.
28.0 m
Estimated pole spacing
3.5
Spacing-to-height ratio used
For preliminary budgeting only — not a substitute for a lighting calculation.
Step 2

Calculate Pole Quantity

Carried over from Step 1 — edit if needed.
Use 2 for twin-arm median poles, if applicable.
—
Estimated pole spacing
—
Pole positions
—
Installed pole quantity
—
Installed fixture quantity
—
Extra fixtures
—
Recommended spares
—
Total purchase quantity

Need a verified road lighting layout? Send us your road drawing, pole height and calculated quantity. MVS Lighting can check the arrangement using the actual fixture IES file and provide a DIALux proposal.

How to Use the Calculator

Enter the Pole Height

Enter the planned mounting height for the project.

Confirm or Estimate the Spacing

If a DIALux layout already exists, enter the confirmed spacing. Otherwise, use the S/H ratio for a preliminary estimate.

Select the Pole Layout

Choose single-sided, staggered, opposite or central median arrangement.

Review the Purchase Quantity

Check the pole, installed fixture, spare and total purchase quantities separately.

How the Estimate Is Calculated

Pole Spacing Estimate

Estimated spacing = pole height × selected S/H ratio. This is a widely used preliminary method, not a substitute for a lighting calculation.

Pole Quantity

Road length divided by spacing gives the number of spacing intervals; the calculator also accounts for the pole at the start of the road.

Fixture Quantity

Each pole may carry one or more fixtures, depending on the layout (for example, twin-arm median poles).

Understand the Results

Estimated Spacing

Suitable for early-stage project budgeting only — not for construction.

Pole Positions

The number of installation positions required along the road.

Installed Fixtures

The number of street lights actually installed, based on the layout and fixtures per pole.

Total Purchase Quantity

Installed fixtures plus extra fixtures (intersections, curves) and recommended spares.

Why the Final Quantity May Change

Intersections and Curves

Intersections and curves may require additional or adjusted pole positions.

Actual Light Distribution

Different IES distributions may allow different spacing at the same mounting height.

Lighting Standards

The final layout still needs to meet applicable road luminance, illuminance, uniformity and glare requirements.

Site Restrictions

Trees, underground utilities, bridges, entrances and construction conditions can affect pole positions.

Frequently Asked Questions

Is this the final pole quantity?

No. The result is for budgeting purposes. The final quantity should be confirmed with the actual fixture IES file, road structure and applicable lighting standards.

Can I use the same spacing for any light?

No. Fixtures with different wattages and optical distributions may support different spacing even at the same mounting height.

Does the calculator replace DIALux?

No. This tool provides a preliminary spacing and quantity estimate. DIALux is used to verify lux, luminance, uniformity and glare based on the actual fixture data.

Related Guides

Request a DIALux Verification

Send MVS Lighting your road drawing, pole height, road length and the calculated quantity above. Our team can verify the layout using the actual fixture IES file and prepare a DIALux proposal.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “info@ledmvs.com”.