By Lighting Engineering Team, MVS Lighting — outdoor lighting manufacturer with 5 production lines and 15+ years of outdoor lighting experience, serving global industrial and infrastructure projects. Last updated: 2026-11
Home > LED Flood Lights > LED Floodlight Lux Levels

Lux is the unit of illuminance — it measures how much light actually lands on a surface, equal to one lumen spread over one square metre (lux = lumens ÷ m²). It is the number that decides whether a lighting project passes inspection, which is why lux — not wattage — should drive your design.
Two things worth knowing up front:
- 1 fc ≈ 10.76 lux (the US uses foot-candles, most of the world uses lux).
- Two fixtures with the same wattage can deliver very different lux on the ground, depending on mounting height, beam angle and layout.
This guide explains what lux is, how it converts to foot-candles, the quality factors lux alone won’t show you, and how to estimate the lux your project needs. For the exact levels and standards of a specific application, follow the dedicated guide linked in each section.
For the full selection framework, see the Complete LED Flood Light Guide or How to Choose the Right LED Flood Light.
👉 Need help getting your project right? [Talk to our lighting team — free →]
Table of Contents
- What Is Lux?
- Lux vs Lumen vs Watt
- Lux vs Foot-Candle
- Why Lux Matters More Than Watts
- What Lux Alone Doesn’t Tell You
- Lux Spec Mistakes We See in Real RFQs
- Recommended Lux by Application
- How to Estimate the Lux You Need
- Why Professional Lighting Simulation Matters
- FAQ
[Image: LED floodlight illuminance measurement on a ground surface — alt text: “LED floodlight illuminance measurement showing lux and foot-candle levels on a ground surface”]
What Is Lux?
In practical terms, lux is what gets measured on site at handover. A reading is taken across the area and compared to the target on the specification — if it falls short, the installation fails, no matter how many watts were installed. That is why lux, the light that actually reaches the surface, is the figure that matters.
Lux vs Lumen vs Watt
These three are constantly confused:
- Watt — the energy the fixture consumes.
- Lumen — the total light output the fixture produces.
- Lux — the light that actually reaches your surface (lumens per m²).
The chain runs one way: watts produce lumens, and lumens — once spread over your area and reduced by losses — produce lux. A buyer who shops on watts alone has no idea how much light will reach the ground. For how wattage relates to output, see the LED Flood Light Wattage Guide.
Lux vs Foot-Candle
If your project is in the US, your drawings and specifications are almost certainly written in foot-candles (fc). Most of the rest of the world uses lux. Both measure the same thing — light per unit area — on different scales:
1 fc ≈ 10.76 lux · lux = fc × 10.76 · fc = lux ÷ 10.76
| Foot-candles (fc) | Lux |
|---|---|
| 1 fc | ~10.76 lux |
| 3 fc | ~32 lux |
| 5 fc | ~54 lux |
| 10 fc | ~108 lux |
| 50 fc | ~538 lux |
A US parking lot specified at 3 fc is roughly 32 lux on an international datasheet. Mixing up the two units when comparing a US specification with a manufacturer’s lux figures is one of the most common spec errors.
Why Lux Matters More Than Watts
Wattage measures consumption, not result. Raise the mounting height, widen the beam angle, or aim a fixture poorly, and the same wattage delivers far less usable lux. That is why projects are accepted or rejected on measured lux, never on watts.
Two project variables decide how much of a fixture’s output becomes usable lux on the ground:
- Mounting height — higher poles cover more area but spread light thinner, lowering local lux. See the Mounting Height Guide.
- Beam angle — wide beams spread light evenly; narrow beams concentrate it. See the Beam Angle Guide.
What Lux Alone Doesn’t Tell You
Hitting an average lux target is necessary but not sufficient. Three quality factors decide whether the installation actually performs. For the required values in a specific sport or venue class, see the Sports Field Lighting Standards guide.
Uniformity (U0 and U1) — how evenly the light is spread: U0 = minimum lux ÷ average lux; U1 = minimum lux ÷ maximum lux. A site can show a high average lux while still having dark corners and bright hotspots. The required uniformity depends on the application and class.
[Image: uniform vs uneven lux distribution — alt text: “Uniform vs uneven lux distribution from commercial LED floodlights”]
Glare (Glare Rating, GR) — badly aimed or uneven lighting creates glare that blinds users and hides obstacles. Good optics and correct aiming control glare; raw lumens do not.
Maintained lux (maintenance factor) — lux falls over time as LEDs depreciate and lenses collect dust. A sound design works to maintained lux by applying a maintenance factor (MF, also called light loss factor) rather than to the bare initial figure. Values are set per project; 0.7–0.8 is commonly assumed for LED outdoor designs.
Key takeaway: a poorly uniform high-lux system can perform worse than an evenly lit lower-lux one. Average lux is only one number among several.

Lux Spec Mistakes We See in Real RFQs
Most lux guides stop at definitions and formulas. In practice, many quoting delays and post-installation disputes trace back to how the lux target was communicated in the first place — not to the calculation itself.
- “50 lux” with no area or fixture count attached. Lux is a ratio (lumens per m²), not a fixed property of a fixture. Asking “how many lumens for 50 lux” without specifying the area is an incomplete question — the same fixture delivers a different lux reading depending on how much ground it covers.
- Initial lux quoted as if it were maintained lux. A spec that says “50 lux” without stating whether that is day-one output or output after depreciation leads to systems that pass at handover and fall out of spec within a few years. Always confirm which figure a spec sheet — yours or a competitor’s — is quoting.
- A generic CU value applied regardless of site conditions. Coefficient of utilisation depends on the fixture’s optics, beam angle, mounting height and aiming, and the site layout — not on a fixed industry constant. A textbook value borrowed from indoor or road lighting routinely over- or under-states what a floodlight delivers. Take CU from the fixture’s IES photometric file or from a simulation.
- A target described as “as bright as the old fixture” instead of a lux number. Common in retrofit enquiries; it forces a back-conversion before sizing can start. See the Metal Halide to LED Conversion Guide if that is your situation.
None of these are calculation errors — they are communication gaps between what is written on a spec sheet and what the number actually means. Confirming area, maintained vs. initial, and site conditions before sizing avoids most of the rework we see afterwards.
Recommended Lux by Application
LED flood lights are an outdoor and large-area solution. The table gives typical starting ranges to orient you; for exact levels, classes and standards, follow the dedicated guide.
| Application | Typical Lux | fc | Full Guide |
|---|---|---|---|
| Parking lot | 10–50 (by zone and traffic) | ~1–5 | Parking Lot Lighting Design Guide |
| Industrial yards / large open areas | Varies by task and standard | — | Industrial Yard Flood Lights Guide |
| Sports & stadiums | Varies by class | — | Sports Field Lighting Standards |
| Basketball court | Varies by level | — | Basketball Court Lighting Design |
How to Estimate the Lux You Need
A quick estimate uses the lumen method. The correct formula accounts for losses — do not simply multiply target lux by area.
Total lumens required = (Target lux × Area) ÷ (CU × MF)
Where:
- CU = coefficient of utilisation — the share of fixture lumens that actually lands on the target area. It varies with optics, height, beam angle and layout, so use the value from the photometric file or simulation.
- MF = maintenance factor (commonly 0.7–0.8).
Illustrative example — 1,000 m² area, target 30 lux, with assumed CU 0.5 and MF 0.8:
Total lumens = (30 × 1,000) ÷ (0.5 × 0.8) = 30,000 ÷ 0.4 = 75,000 lumens
A naïve “30 × 1,000 = 30,000 lumens” estimate falls well short because it ignores utilisation and maintenance losses. The CU and MF above are assumptions for illustration only — your project’s values will differ.
Once you have total lumens, the next step is converting that into a fixture count for your wattage and layout — see How Many Flood Lights Do I Need. To turn lumens into wattage, see the Wattage Guide.
For any real project, confirm the result in DIALux or AGi32 — a hand calculation gets you the range; only a simulation reveals the actual distribution, uniformity and glare.
Why Professional Lighting Simulation Matters
Two designs can hit the same average lux and still perform completely differently — fixture count, beam angle, aiming and mounting height all reshape the result. A simulation reveals hotspots, dark zones and glare before installation, when fixing them costs nothing. It also turns a vague enquiry into a precise, buildable layout.
[Image: DIALux simulation of lux distribution across an area — alt text: “DIALux lighting simulation showing LED floodlight lux distribution across an outdoor area”]
Send us your dimensions and target lux, and we’ll return a layout you can build to.
[Get a free DIALux lighting simulation for your project →]
FAQ
What is lux in lighting? Lux is the unit of illuminance — the light landing on a surface, equal to one lumen per square metre. It is the figure measured to confirm a project meets its lighting target.
Lux vs foot-candle — what’s the difference? Both measure illuminance. The US uses foot-candles, most of the world uses lux. 1 fc ≈ 10.76 lux.
How do I calculate the lux my project needs? Use the lumen method: total lumens = (target lux × area) ÷ (CU × MF). Take CU from the fixture’s photometric data or a simulation, and MF from your design assumptions (commonly 0.7–0.8). Then divide by fixture output to size the installation, or run a simulation.
Is lux better than watts for choosing flood lights? Yes — lux measures the light that actually reaches the surface, while watts only measure power draw. The same wattage can deliver very different lux depending on height, beam angle and layout.
Is the lux number on a spec sheet the day-one figure or the maintained figure? Always confirm before comparing two quotes. A spec sheet that doesn’t say whether its lux figure is initial or maintained is one of the most common sources of mismatched expectations between buyer and supplier.