Written by Chris Choi, Technical Sales Manager at MVS Lighting, with practical experience supporting overseas buyers on LED street lighting projects.
Use this calculator to estimate pole spacing, pole quantity and fixture quantity from the road length, mounting height and layout type. The result is suitable for preliminary budgeting only.
Need a verified road lighting layout? Send us your road drawing, pole height and calculated quantity. MVS Lighting can check the arrangement using the actual fixture IES file and provide a DIALux proposal.
Enter the planned mounting height for the project.
If a DIALux layout already exists, enter the confirmed spacing. Otherwise, use the S/H ratio for a preliminary estimate.
Choose single-sided, staggered, opposite or central median arrangement.
Check the pole, installed fixture, spare and total purchase quantities separately.
Estimated spacing = pole height × selected S/H ratio. This is a widely used preliminary method, not a substitute for a lighting calculation.
Road length divided by spacing gives the number of spacing intervals; the calculator also accounts for the pole at the start of the road.
Each pole may carry one or more fixtures, depending on the layout (for example, twin-arm median poles).
Suitable for early-stage project budgeting only — not for construction.
The number of installation positions required along the road.
The number of street lights actually installed, based on the layout and fixtures per pole.
Installed fixtures plus extra fixtures (intersections, curves) and recommended spares.
Intersections and curves may require additional or adjusted pole positions.
Different IES distributions may allow different spacing at the same mounting height.
The final layout still needs to meet applicable road luminance, illuminance, uniformity and glare requirements.
Trees, underground utilities, bridges, entrances and construction conditions can affect pole positions.
No. The result is for budgeting purposes. The final quantity should be confirmed with the actual fixture IES file, road structure and applicable lighting standards.
No. Fixtures with different wattages and optical distributions may support different spacing even at the same mounting height.
No. This tool provides a preliminary spacing and quantity estimate. DIALux is used to verify lux, luminance, uniformity and glare based on the actual fixture data.
Learn how mounting height, road width and light distribution affect the result in our street light pole spacing guide.
After estimating the required quantity, review our LED streetlight series for available wattages, road optics and project-grade configurations.
Send MVS Lighting your road drawing, pole height, road length and the calculated quantity above. Our team can verify the layout using the actual fixture IES file and prepare a DIALux proposal.
MVS Lighting
Professional LED Outdoor Lighting Supplier
Reply within 2 hours
Need LED lighting for your project?
WhatsApp Us
Online | Privacy policy
Get Quote on WhatsApp